Pool and hot tub chemical calculators
Enter your test results and pool size. Get the exact amount of chlorine, acid, baking soda or salt to add — in the product you actually bought, in the order that wastes the least chemical.
Example: 15,000 gallon pool
- pH 7.8 → 7.5: about 12 fl oz of 31.45% muriatic acid (TA 80, CYA 30)
- Chlorine 2 → 6 ppm: about 61 fl oz of 12.5% liquid chlorine
- Salt 2,600 → 3,200 ppm: 75 lb — two 40 lb bags
Adjust in this order
Each reading affects the next, so fixing them out of order means adding chemicals twice. The calculators link to each other in this sequence.
- GallonsEvery dose depends on it. A 20% volume error is a 20% dose error.
- AlkalinityIt buffers pH, so set it before pH.
- pHAcid or soda ash, adjusted for your alkalinity.
- ChlorineTarget set by your stabilizer level, not a fixed number.
- Stabilizer, calcium, saltSlow-moving levels you check every few weeks.
All calculators
Pool volume
Gallons and liters for every pool shape — the number every dose depends on.
Chlorine
How much chlorine or shock to add, matched to your stabilizer level.
Water balance
pH, alkalinity, calcium and stabilizer — adjust in the right order.
- Calcium hardnessCalcium chloride to raise CH, or how much water to replace to lower it.
- Cyanuric acidStabilizer to add or water to replace, plus the matching chlorine range.
- LSISaturation index with factor breakdown and the fix that brings it to 0.
- AlkalinityBaking soda to raise TA, or acid plus aeration rounds to lower it.
- Pool chemicalsTurn a full test into an ordered plan with doses and LSI.
- Pool pHAcid or soda ash dose to hit your pH target, adjusted for TA and CYA.
Salt pools
Bags of salt to add, how much water to drain, and generator settings.
Hot tubs
Small-volume doses in teaspoons and ounces, refill timing and running cost.
- Hot tub chemicalsChlorine or bromine, pH and alkalinity doses in teaspoons and grams.
- Drain and refillDays between water changes and your next drain date.
- Hot tub power costMonthly kWh and cost from heater, pumps, climate and your rate.
- Hot tub volumeGallons and liters for square, round and octagon spas, minus seats.
Pump & heating
Pump flow, run time, heater size and what it costs to run.
Checklists
Printable opening and closing checklists with your amounts filled in.
Where the numbers come from
Every calculator uses published chemistry: ppm-to-pounds conversions, the strength printed on common product labels, and a carbonate-equilibrium model for pH that accounts for alkalinity and stabilizer. Target ranges follow widely used guidelines from public-health codes and pool industry references. Each page shows its formula and a worked example, and How we calculate lists every assumption in one place.
Results are estimates for residential pools and hot tubs. Add about three-quarters of a large dose, circulate, retest, then finish. Product labels take priority when they differ.