Above Ground Pool Gallons Calculator
Choose your round or oval pool size and wall height, adjust how far the water sits below the top rail, and get the gallons and liters your above-ground pool actually holds.
Last reviewed · How we calculate
Your result
—
- Water depth
- —
- US gallons
- —
- Liters
- —
- Each inch of water
- —
Saved in your browser for the other calculators. Use it in the salt calculator, the chlorine calculator or the test results calculator.
How many gallons does an above ground pool hold?
Above ground pool gallons depend on three things: the footprint (diameter, or length and width), the wall height, and how high you actually keep the water. That last one is where most charts go wrong. They multiply by the full wall height, but nobody fills an above-ground pool to the top rail — the water sits around the middle of the skimmer opening, usually about 6 inches below the top of the wall. This calculator assumes that 6 inch gap by default and lets you change it, so a 52 inch wall is treated as 46 inches of water.
The formulas
Round pools are simple circles. Oval above-ground pools are not true ellipses: nearly all of them have two straight sides joined by a half circle at each end, held in place by side braces or buttresses. This calculator treats an oval that way — a rectangle in the middle plus one full circle made of the two ends.
Round: 3.1416 × (diameter ÷ 2)² × water depth (ft) × 7.48 Oval: [width × (length − width) + 3.1416 × (width ÷ 2)²] × water depth (ft) × 7.48 Water depth (ft) = (wall height in − gap in) ÷ 12
The difference matters. For a 15 × 30 ft oval with 46 inches of water, the straight-sided formula gives about 11,519 gallons, while the ellipse formula (length × width × depth × 5.9) gives about 10,135 — roughly 12% less. If your oval really is an ellipse with no straight section, use the oval option on the main pool volume calculator instead.
Round above-ground pool gallons
| Diameter | 48 in wall (42 in water) | 52 in wall (46 in water) | 54 in wall (48 in water) |
|---|---|---|---|
| 12 ft | 2,961 | 3,243 | 3,384 |
| 15 ft | 4,627 | 5,067 | 5,288 |
| 18 ft | 6,662 | 7,297 | 7,614 |
| 21 ft | 9,068 | 9,932 | 10,364 |
| 24 ft | 11,844 | 12,972 | 13,536 |
| 27 ft | 14,991 | 16,418 | 17,132 |
| 28 ft | 16,122 | 17,657 | 18,425 |
| 30 ft | 18,507 | 20,269 | 21,151 |
| 33 ft | 22,393 | 24,526 | 25,592 |
Oval above-ground pool gallons
| Size | 48 in wall (42 in water) | 52 in wall (46 in water) | 54 in wall (48 in water) |
|---|---|---|---|
| 12 × 18 ft | 4,846 | 5,308 | 5,538 |
| 12 × 24 ft | 6,731 | 7,372 | 7,693 |
| 15 × 24 ft | 8,161 | 8,939 | 9,327 |
| 15 × 30 ft | 10,518 | 11,519 | 12,020 |
| 16 × 32 ft | 11,967 | 13,106 | 13,676 |
| 18 × 33 ft | 13,732 | 15,039 | 15,693 |
| 18 × 40 ft | 17,030 | 18,652 | 19,463 |
Worked example: 18 ft round, 48 inch wall
The radius is 9 ft, so the water surface is 3.1416 × 9 × 9 = 254.5 sq ft. With the water 6 inches below a 48 inch wall, the depth is 42 inches, or 3.5 ft. That gives 254.5 × 3.5 = 890.6 cubic feet, and 890.6 × 7.48 = about 6,662 gallons. Each inch of water in this pool is about 159 gallons, so if your water sits 2 inches lower than assumed, you have about 318 gallons less.
Why nominal size can be off
Pools are sold by nominal size, and the actual inside diameter can be a few inches different depending on the wall and top-rail design. A few inches on a 24 ft pool changes the volume by only 1–2%, which is fine for chemical dosing. Depth matters more: on a 24 ft round pool, every inch of water is about 282 gallons. If you need a precise figure — for example before adding salt for a new salt system — measure the inside diameter at water level and the actual water depth, and use the custom option.
Beaded-liner pools with a dug-out center (sometimes called expandable or deep-end liners) hold more than these tables show. Estimate the extra depth at the center, then average it with the wall depth and enter that average in the main pool volume calculator.
Filling and dosing an above-ground pool
A new above-ground pool takes a long time to fill from one garden hose; the fill time calculator turns these gallons into hours and a water bill. Once it is full, the volume shown here is saved for the chlorine calculator and the salt calculator, so you do not have to type it again.
Fill a vinyl-lined above-ground pool steadily and smooth out liner wrinkles in the first few inches of water. Do not drain it completely for winter or repairs unless the manufacturer's instructions say how — an empty liner can shrink, and some walls rely on the water's weight to stay in shape.
Questions people ask
How many gallons is a 24 ft round above ground pool?
A 24 ft round pool with a 52 in wall, filled to 6 in below the top (46 in of water), holds about 12,972 US gallons. With a 48 in wall it is about 11,844 gallons, and with a 54 in wall about 13,536 gallons.
How many gallons is an 18 ft round above ground pool?
An 18 ft round pool holds about 6,662 gallons with a 48 in wall, 7,297 gallons with a 52 in wall and 7,614 gallons with a 54 in wall, assuming the water is 6 in below the top of the wall.
How many gallons is a 15x30 oval above ground pool?
A 15 × 30 ft oval with straight sides and a 52 in wall holds about 11,519 gallons at 46 in of water. A true-ellipse formula would give only about 10,135 gallons, which is why oval charts disagree.
How full should an above ground pool be?
Most manufacturers want the water about halfway up the skimmer opening, which usually puts it roughly 6 in below the top of the wall. Check your skimmer: if the opening sits lower or higher, enter your own gap.
How many gallons are in one inch of an above ground pool?
One inch of water in a 24 ft round pool is about 282 gallons, and in a 16 × 32 ft oval about 285 gallons. The calculator shows the figure for your size, which is handy for topping up and for draining before winter.